Exposure Light Meter
Digital Wildlife Photography Tutorial – Getting the Correct Exposure
Author: Ben Juby, Ph.D.
The exposure of a digital photograph is affected by the camera’s aperture, shutter speed, sensor ISO rating, and of course the amount of light in the scene being photographed. An incorrect exposure will turn an otherwise well composed wildlife image into something mediocre and at worst completely ruin a shot.
All digital cameras have an automatic exposure setting, so it may seem that exposure is something that is best left up to the camera. It’s certainly true that in some situations your camera’s automatic exposure system will produce properly exposed shots, but there are also many situations where it will not.
Automatic exposure systems only tend to work well when a scene and the subject animal consist mainly of mid-tones. This is because automatic exposure averages out the exposure of the scene as a whole, achieving an overall exposure equivalent to if the scene was a uniform mid-tone grey. Since virtually no real world scenes consist of purely mid-tone grey, this can mean that your wildlife photos may end up incorrectly exposed if you rely purely on your camera’s default exposure settings.
Scenes that consist of mainly very pale colours will come out underexposed (such as a pale animal in the snow) and scenes with very dark colours will come out overexposed. Furthermore, pale animals against dark backgrounds may be overexposed and dark animals against pale backgrounds may be underexposed. Animals with pied markings such as puffins or magpies will usually have their white areas overexposed. Therefore it is often necessary in wildlife photography to adjust your camera’s default settings to correctly expose your shots.
Exposure Settings
Prosumer and DSLR cameras have three main light metering modes available:
* Multi-Segment or Matrix – this is a camera’s default automatic exposure mode. This divides the image into a number of segments and averages out the exposure for the scene as a whole. This mode can work well for frame filling close-ups of animals and for wider shots of scenes consisting of mainly mid-tones, but as explained in the previous section, this mode will often produce incorrectly exposed images when the scene has significant areas of extreme light or dark.
* Spot Metering – in this mode the camera bases its exposure value on a single point in the image (usually the centre of the image, but this point can be adjusted on most cameras). This is a useful mode for wildlife photography as it often can enable you to achieve the correct exposure for the subject animal. Spot metering should however be used with care as the light readings can vary significantly depending on where you point the camera – it is best to choose a point on your subject that has a mid-tone.
* Centre-Weighted – like multi-segment metering this takes an average of the scene as a whole, but in this mode more importance is given to the centre of the image in the averaging process, meaning that the camera tries to ensure the centre of the image is correctly exposed. This is another good setting for wildlife photography that unlike spot metering is less sensitive to variations in scene brightness. As centre-weighted metering still uses as form of averaging it can still however produce incorrect exposure if the centre of the image contains extremes of light or dark.
If you find your camera’s metering doesn’t produce good results for a given scene (e.g. when your subject animal is very light of dark) you can use the manual EV Compensation (Exposure Value Compensation) setting on your camera to adjust the exposure it will use. For example, without EV compensation a spot-metered or centre-weighted picture of a white swan is likely to come out underexposed (as the camera tries to achieve a mid-tone grey for the swan’s white plumage). By setting your camera to a positive EV Compensation (you may need to use a little trial and error to find the exact amount of compensation required) you’ll be able to get a picture where the swan’s plumage is exposed correctly.
Another trick you can use to get the correct exposure is to use the exposure bracketing function on your camera. In this mode the camera takes three shots at different exposure settings, one at the camera’s recommended exposure, one slightly underexposed and one slightly overexposed, increasing the likelihood that one will be correctly exposed. It should be noted that as bracketing takes multiple exposures it is not particularly suitable for shooting animals in action since the animal is likely to move between exposures making each bracketed shot different, and unless you are very lucky, the best exposed shot might not be the shot with the animal in the best position.
Checking For Correct Exposure
You may be tempted to try and check the exposure of a picture after you have taken it by viewing it on your camera’s screen. While this may give you rough idea, it is not very reliable as a screen’s brightness can vary and the ambient lighting conditions can affect how an image appears on the screen. A far more reliable way of assessing exposure is to look at your camera’s histogram. The histogram is a graph showing the distribution of tones from light to dark in an image. For most shots you want a bell shaped histogram with the majority of pixels towards the middle of the graph, although this does not necessarily hold true for pictures that have significant light or dark areas.
Another feature most cameras provide for checking exposure is an image playback mode where the massively overexposed parts of the image flash on screen. Massively overexposed means a region of an image is so overexposed that it has gone to pure white – this is referred to as clipped or burned out.
Overexposure to the point where significant portions of the image are clipped is something you should avoid at all costs in your digital photography. Once a portion of an image is clipped all information in that part of the image is lost – nothing can be done in tools like Photoshop to recover it. It should be noted here that it is fine to clip specular highlights, for example caused by the sun reflecting in the animal’s eyes, but clipping large areas of detail should always be avoided.
The problems associated with clipping mean that it is generally safer to slightly underexpose a digital image than it is to overexpose it, as this will retain more detail in the highlights. Underexposed images can be corrected easily in tools like Photoshop, but if an image is significantly underexposed the corrected image will have an undesirable grainy texture called ‘noise’. Slight overexposure can also be corrected in Photoshop but only when clipping hasn’t occurred.
About the Author:
Ben Juby is a wildlife photography enthusiast and freelance web developer. More wildlife photography tips and wildlife photography articles are available at his website: http://www.digital-nature.info
Article Source: ArticlesBase.com – Digital Wildlife Photography Tutorial – Getting the Correct Exposure
Photography Tutorial 6 ( Light Meter and Histogram)
|
|
Trifield 100XE EMF Meter $149.95 The Trifield ® Meter is a gaussmeter, electric field meter, radio field strength meter in a single until. When measuring electromagnetic fields (EMF’s), the primary concern is usually magnetic fields, which can be tricky to measure. If a less sophisticated 1-axis gaussmeter is used, a reading of zero could result even where the field is strong. A 1-axis meter must be oriented correctly to measure… |
|
|
Black & Decker PCS10 PlantSmart Digital Plant Care Sensor $19.99 Includes PlantSmart Digital Plant Care Sensor – PCS10, USB Cable, (1) AAA Battery, Storage Bag, Quick Start Card… |
|
|
Light Meter LX1010B,50,000 Lux Luxmeter with lcd display $8.18 The digital lux meter LX1010B can measure up to 50,000 lux, approximately 5,000 footcandles. It’s used for checking the level of luminance, luminance is a measure of the amount of light falling on a surface. It is defined as: ‘the density of the luminous flux incident on a surface’. It is the quotient of the luminous flux by the area of the surface when the latter is uniformly illuminate… |
|
|
Minolta Maxxum 7 35mm SLR Camera (Body Only) $599.99 Maxxum 7 35mm SLR Camera Body (Lens Not Included) ***OPEN BOX*** This NEW product you are browsing has been inspected by our certified technicians to ensure that it meets factory specifications; it is guaranteed to be in perfect working order.The Equipment is sold in AS IS condition and returns will not be accepted so please contact us with any questions BEFORE placing an order at 1-800… |
|
|
UV HAWK Q3I-UVHAWK2 Waterproof Ultraviolet Sunlight Meter $39.99 PERFECT TOOL TO MEASURE THE INTENSITY OF ULTRAVIOLET LIGHTWATERPROOF DESIGN QUICKLY & EASILY TESTS THE UV INDEX & INDICATES THE LEVEL OF PROTECTION USER NEEDS BEFORE ENJOYING TIME OUTSIDEFOR USE VIRTUALLY ANYWHERE USER IS EXPOSED TO PROLONGED SUNLIGHTUPC : 283779046374Shipping Dimensions : 5.75in X 3.75in X 1.25inEstimated Shipping Weight : 0.1624… |
|
|
HQRP Color Charm / Keyring UV Radiation Tester / Meter for Skin and Eyes Health Monitoring / Ultraviolet Sunlight Detection / Solar Ultraviolet Radiation $4.99 The center of the Solar UV Meter with 3D effect can change series of color according to Solar UV Index. It is how Solar UV measuring function is maintained. The 4 standard color indicators show intensity of Solar UV rays. To know the Solar UV Index, it is enough to compare the colorchange with the 4 standard colors around. The greater intensivity is the darker is the color.Clear colors mean small … |
|
|
Solar Powered Battery Charger with Meter Charges 2 D – C – AA – AAA Batteries $25.25 Brand New Universal Solar 11-in-One Battery Charger with Meter Charges 2 “D” – “C” – “AA” – “AAA” Batteries Designed for charging most popular types of rechargeable batteries: D size (UM-1), C size (UM-2), AA size (UM-3), AAA size (UM-4) and 7 different size GUM (Prismatic) Batteries! Description: This is the most versatile battery charger available on the market today. The solar panel is incorpe… |
|
|
Mastech Digital Illuminance/Light Meter LX1330B , 0 – 200,000 Lux Luxmeter $79.95 The LX1330B can measure from 0 up to 200,000 lux, you can switch the units between lux and footcandle by simply pressing a button. It’s powered by a 9V battery, which last for 200 hours or even longer. Other nice features include data hold, auto zero and more. Features: High Accuracy and rapid response Auto Zeroing Over-range indication Unit and Sign display for easy reading Data Hold L… |
|
|
X-Rite ColorChecker Passport Software $84.00 Combining the powerful color capabilities of the ColorChecker Passport and Adobe Imaging solutions into your RAW workflow will undeniably reduce your image processing time and improve quality control. Quickly and easily capture accurate color, instantly enhance portraits and landscapes and maintain color control and consistency from capture to edit. Achieve superior color results in a fraction of … |
|
|
ExpoImaging ExpoDisc 77mm Digital White Balance Filter – Neutral $96.95 The ExpoDisc Professional Digital White Balance Filter (patent pending) is a custom white balance filter that allows digital photographers to quickly and easily set an accurate custom white balance. Consistently producing excellent results in natural, artificial, and studio lighting, the versatile ExpoDisc even excels in difficult mixed lighting environments…. |
